|
Paving Brand Products
Masterpave
Masterpave ready-to-use, liquid admixture is expressly recommended for
use in concrete paving. Masterpave admixture meets ASTM C 494
requirements for Type A, water-reducing, Type B, retarding, and Type D,
water-reducing and retarding admixtures.
Features
Reduced
water content required for a given workability
Controlled setting characteristics - normal or retarded
Benefits
Increased compressive and flexural strength
Improved workability
Reduced
segregation
Flexibility in the scheduling of placing and finishing operations
Offsets
effects of early stiffening during extended delays between mixing and
placing
Masterpave +
Masterpave +Â ready-to-use, liquid admixture is for use in concrete
paving. Masterpave + admixture meets ASTM C 494 requirements for Type A,
water-reducing, admixture.
Features
Increased compressive and flexural strength
Reduced
water content required for a given workability
Normal
setting characteristics
Benefits
Improved workability
Reduced
segregation
Superior finishing characteristics
Masterpave N
Masterpave N ready-to-use, liquid admixture is expressly recommended for
use in concrete paving. Masterpave N admixture meets ASTM C 494
requirements for Type A, water-reducing, Type B, retarding, and Type D,
water-reducing and retarding admixtures.
Features
Increased compressive and flexural strength
Reduced
water content required for a given workability
Controlled setting characteristics - normal or retarded
Benefits
Improved texturing characteristics
Greater
edge stability and slump control
Improved workability using less water
Reduced
segregation
Improved placing rate
Masterpave RI
Masterpave RIÂ ready-to-use liquid admixture is expressly recommended
for producing more uniform and predictable quality pavement concrete.
Placing and finishing requirements are facilitated because this
admixture retards setting time. Masterpave RI admixture meets ASTM C 494
requirements for Type B, retarding, and Type D, water-reducing and
retarding, admixtures.
Features
Reduced
water content required for a given workability
Retards
setting characteristics
Benefits
Improved workability
Reduced
segregation
Superior finishing characteristics
Controlled retardation - depending on the dosage
Increased compressive and flexural strength
Flexibility in scheduling of placing and finishing operations
Offsets
effects of too early stiffening during extended delays between mixing
and placing
Helps
eliminate cold joints
Pave Air
Pave-Air admixture is a neutralized Vinsol* resin solution for
entraining air in paving concrete mixes. Pave-Air admixture meets the
requirements of ASTM C 260, AASHTO M 154, and CRD-C 13.
Features
Ready-to-use - in the proper concentration for rapid, accurate
dispensing
Benefits
Increased resistance to damage from cyclic freezing and thawing
Increased resistance to scaling from deicing salts
Improved plasticity and workability
Reduced
permeability - increased watertightness
Reduced
segregation and bleeding
Pave Air 90
Pave-Air 90 air-entraining admixture is used in pavement concrete mixes.
It meets the requirements of ASTM C 260, AASHTO M 154 and CRD-C 13.
Features
Ready-to-use - in the proper concentration for rapid, accurate
dispensing
Benefits
Improved resistance to damage from cyclic freezing and thawing
Improved resistance to scaling from deicing salts
Improved plasticity and workability
Reduced permeability - increased water tightness
Reduced segregation and bleeding
|
